Posted 11th December 2020

If your rollers are smearing and flattening the soil and making drilling hard work, then our new Steel Tensioned Packer is worth considering. We’ve designed them with a shouldered profile and 190mm spacing to leave an open surface, which dries out quickly…

Posted 11th December 2020

The first consignment of our new one-piece low disturbance point has arrived! Designed for medium depth cultivation, with minimal soil disturbance, the Agricast GLX is backwards compatible with the Sumo GLS and grassland legs. We’ve incorporated Tungsten on the leading edges and…

Posted 26th November 2020

We love an eBay bargain and were delighted to win this Simba Series 2B disc harrow cultivator. Obviously, it’s seen better days and over the coming weeks, we will be refurbishing it. The first job is to replace the tyres. You can follow…

Posted 17th September 2020

We are about to introduce a new one-piece low disturbance point. Designed to be hard-wearing and backwards compatible with Sumo low disturbance legs on the brand’s GLS and LDS machines, the new point offers a lower cost per acre than other parts….

Posted 17th September 2020

Demand for our complete packer refurbishment service has risen dramatically in the last few months! We’ve worked on a wide range of machines, ranging from a 4.2m subsoiler up to 12m Horsch Terrano. Complete new PRR-710 packers have been assembled ready to…

Posted 13th July 2020

A supplier of replacement wearing parts has reported a record-breaking first six months of the year. Agricast, which designs, manufactures and sells a wide range of agriculture parts, has seen sales increase by over 50% year on year. William Robinson, managing director,…

Posted 3rd June 2020

The rising cost of replacement wearing parts from Original Equipment Manufacturers (OEMs) has fuelled the development of Agricast’s new range of complete bolt-on packers. Agricast’s complete bolt-on packer options aim to be a simple and cost-effective solution for farmers looking to replace…

Posted 28th May 2020

We’re rather pleased with these PRR-610 rings! We refurbished them at our workshop and helped the single-handed small farmer refit them to his 4.2m Cultipress machine near Horncastle, Lincolnshire, last week. As well as supplying the new rings and bearings we also…

Posted 23rd March 2020

We are so confident in the quality and long-term durability of our Boron PRR products that we have now introduced a lifetime warranty against defects. If you do find your Agricast PRR rings crack or warp over the course of their lifespan,…

Posted 28th November 2019

Agricast will continue its focus on offering high-quality parts at affordable prices at LAMMA 2020, with the launch of a new high strength scraper for use on Simba machines. The Lincolnshire manufacturer of replacement wearing parts will be showcasing the improved scraper…

Posted 16th October 2019

A Lincolnshire manufacturer has seen a sudden increase in orders from Eastern Europe after introducing a range of specialist parts. Since adding pins, bushes and bespoke bolts for Simba machines to its website, Agricast has received large orders from Bulgaria and the…

Posted 24th September 2019

Visitors to Agricast’s stand at this year’s Midlands Machinery Show will be the first to see the company’s new PRR-610-LW wheel and range of subsoiler points. Following the successful launch of the 610 and 710 Press Roll Rings at last year’s Midlands…

Posted 5th August 2019

Agricast is celebrating selling its 1,000th High Strength Wheel, just eleven months after launching it. The milestone wheel is part of a consignment headed to Springfield Hay in New South Wales, Australia. The supplier of wearing parts introduced the High Strength Wheel…

Posted 1st August 2019

A sustained increase in sales has led Agricast to recruit two new people. The leading supplier of wearing agricultural parts, including Cambridge Rolls, Press Rings, Disc Harrows and Subsoilers, has employed Phil MacIntosh as Warehouse & Operations Manager and Sam Ward as…

Posted 1st May 2019

  A few months ago we were approached by Colin at Stud Farm in Nottinghamshire. Colin was looking for a unique set of rollers for his farm. Obviously, we were delighted to help him out. We followed William on his trip to…

Posted 29th April 2019

Agricast will be introducing visitors to this year’s Cereals event to its brand new range of bolt-on assemblies for disc harrows and presses. Known for its high-quality range of replacement wearing cultivation parts, Agricast introduced the new service in March this year….

Posted 1st March 2019

For the last six months, we’ve been working on a new product, and we’re now ready to test it! We think our Abrasion Resistance and Defence (ARD) Tungsten-infused hard facing could be the toughest and most resilient on the market but we…

Posted 27th February 2019

Investment in new product development and marketing has increased a Lincolnshire agricultural machinery manufacturer’s annual turnover by 40%. Agricast, which supplies replacement wearing parts to farmers, saw its turnover almost double in 2018. 2019 has started equally well for the company, with…

Posted 23rd November 2018

Visitors to LAMMA 19 will be the first outside of the East Midlands to see Agricast’s newest products. The leading supplier of replacement wearing parts will be showcasing its High Strength Wheel and Press Roll Ring on Stand 20.422 in Hall 20…

Posted 6th November 2018

It’s almost a year to the day that Agricast took delivery of the original production machinery bought during the liquidation of the former Simba site in Sleaford. It’s a move that has boosted this Lincolnshire business’ annual turnover by over 20%. In…

Posted 28th September 2018

Agricast, the leading supplier of replacement wearing parts, will be showcasing two new products at this year’s Midlands Machinery Show (21st – 22nd November). The Lincolnshire company, which will be found in Hall JCH3, will be bringing its new High Strength Ring…

Posted 28th June 2018

Agricast has reinvented the wheel this month with the launch of its Press Roll Ring (PRR). Using the established double disc ring as its starting point, the new Agricast product takes advantage of the patent expiry on the original, while respecting the…

Posted 23rd May 2018

18 months of development work is nearly complete! #ReinventingTheWheel  Keep an eye on our Facebook page and Twitter feed for some exciting news in June.

Posted 11th April 2018

Agricast has this month launched its new range of Tungsten Carbide parts. Designed to replace old wearing steel parts, the new range comprises plough points, cultivation points and weld on tiles in many different shapes and sizes. The Tungsten Carbide tipped parts,…